INDO PLUS PNEUMATIC POWER PRESS – Indo Engineering Co

indo plus pneumatic power press

non geared

Power press is a machine tool that changes the shape of a work piece by the application of pressure

Left to Right Series:

Range: 10/250 Tonnes in single geared, non-geared, inclinable, non-inclinable or fixed inclined models.

Design features:

Frame: Rigid, welded, one piece construction made from tested fusion welding quality steel ensures minimum deflection and vibrations thus improving die and machine life.

Main Shaft and Bearings: Normalized medium carbon steel shaft, ground finished on bearing surfaces and heavy walled Nickel Phosphor bearings with hand scaped bores keep bearing pressures low and ensures long working life.

Slide and guides: Cast Iron slides running in two extra long guides lined with high quality non-metallic liners eliminate slide deflection. Hand scraped bearing surfaces provide smooth movement of slide square to the table resulting in highly accurate press work and extended die life.

Electrical controls: Easy to see, easy to use main control station with controls for power ON/OFF, START/STOP once ‘inch’ continuous, semi continuous clutch mode selection and clutch on operation with emergency stop simplifies operation greatly. Control supply 230 V, 50Hz.

Lubrication: Motorized lubricator provides pressurized metered amount of oil to all important points.

Clutch and Brake: Pneumatically operated clutch-brake combination developed specially for speed operation eliminates overlapping of torque, gives faster action and reduces lining wear to the minimum.

Other Standard Features: Conveniently located and effortless adjustable slide adjustment mechanism. Stroke adjustment facility in several steps for flexibility in use, standard Bolster, General purpose motor 415V, 3Ø, 50 Hz for presses less than 100T capacity.

Standard equipment with machine: Flywheel and gear guard, bar ejector on slide, air filter, lubricator, regulator, cam limit switch, motorized lubrication system.

Optional Accessories: Digital Counter, Counter balance, CAM type ejector, air cushion, PLC panel, Variable speed drive, Safety curtain, Anti vibration pads, Hydraulic overload protector.

SPECIFICATION - 10 TO 250 CAPACITIES

(Above 100 tonne capacity, specifications as per customer’s demand.)

MODEL NO.		UNITS	IEC – 10	IEC – 16	IEC – 25	IEC – 32	IEC – 40	IEC – 50	IEC – 63	IEC – 100
CAPACITY AT 20
CRANK ANGLE		TONNE	10	16	25	32	40	50	63	100
BEFORE BDC AT
STANDARD STROKE
Stroke Fixed	Standard	mm	50	60	80	100	90	90	100	125
	Optional	mm	20,25,32	25,32,40	32,40,50,	32,40,50	40,50,63,	40,50,63	50,63,80,	63,80,100,
			50,63,100	63,80,150	100110150	100110150	100125150	100125150	125160	160
Stroke	Standard	mm	8 to 40	8 to 50	8 to 63	8 to 65	8 to 80	8 to 80	8 to 100	8 to 125
Adjustable	Optional	mm	8 to 63	8 to 80	8 to 100	8 to 100	8 to 125	8 to 125	8 to 160	8 to 160
Throat	Standard	mm	170	190	250	250	275	275	300	325
	Deep	mm	224	280	280	280	315	350	400	450
	Standard	mm	200	224	250	250	280	280	315	355
Shut Height	Medium	mm	250	280	315	315	355	355	400	450
	High	mm	315	355	400	400	450	450	500	560
Slide Adjustment		mm	50	50	50	50	60	60	60	80
Slide Face	Standard	mm	180 x 280	200 x 300	220 x 320	220 x 320	250 x 400	250 x 400	280 x 450	315 x 500
FB x LR	Flange	mm	315 x 400	355 x 450	400 x 500	400 x 500	450 x 560	450 x 560	500 x 630	560 x 710
Slide Face Opening		mm	40 x 60	40 x 75	50 x 75	50 x 75	50 x 85	50 x 85	50 x 85	50 x 85
Dia x Depth
Clear Distance		mm	250	280	315	315	355	355	400	450
Between Upright
Height of table		mm	800	800	800	800	800	800	800	900
Surface from Floor
Size Of Table	Standard	mm	350 x 500	355 x 560	400 x 630	460 x 630	500 x 710	520 x 710	550 x 800	600 x 900
FB x LR	Deep	mm	400 x 500	450 x 560	500 x 630	500 x 630	560 x 710	560 x 800	630 x 800	710 x 900
		mm	400 x 630	450 x 710	500 x 800	500 x 800	560 x 900	600 x 800	630 x 1000	710 x 1120
Opening in the Table		mm	160 x 200	180 x 224	200 x 250	200 x 250	225 x 280	225 x 280	250 x 315	280 x 335
			x 200	x 224	x 250	x 250	x 280	x 280	x 315	x 335
Bolster Thickness		mm	65	70	75	75	80	80	85	100
Stroke per	Non-geared	SPM	140	125	120	120	100	100	90	80
Minute
Motor	Non-geared	kW/rpm	0.75/960	1.5/960	2.2/960	2.2/960	3.7/960	5.5/960	5.5/960	7.5/960

Approximate	Non-geared	cm	111x74x235	126x95x257	142x110x272	142x110x272	188x134x313	199x142x337	210x150x360	250x180x380
Overall Size
FB x LR x Ht.
Approximate	Non-geared	Kg	600	1300	2200	2500	4140	4640	5500	7500

1. Shunt height at standard maximum stroke is the distance between table surface and slide face with slide at bottom of stroke adjustment .

2. For strokes less than standard maximum, the shut height will be increased by half the difference, for strokes more than standard maximum,

the shut height will be redused by half the difference in stroke.

WE RESERVE THE RIGHT TO CHANGE DESIGN AND MODIFY SPECIFICATIONS AT THE DESERTION OF OUR ENGINEERING DEPARTMENT